Got a leaky old faucet but no idea what model it is? If it says “Price Pfister” on it—or just “Pfister”—you’re halfway there. The tricky part is figuring out the exact model so you can get the right replacement parts or cartridges.
Whether it’s in your kitchen, bathroom, or shower, here’s a simple guide to help you identify older Price Pfister faucets without tearing your hair out.
1. Look for brand markings and logos
Start with the basics. Check the faucet handle, spout, base, and escutcheon (the metal plate behind the handle or under the faucet). Older Price Pfister products may have:
- The full “Price Pfister” name
- Just “Pfister” (especially on products made after 2010)
- Stylized “PP” logos (found on some decorative lines)
If there’s no clear brand marking, look underneath the faucet or on the mounting hardware behind the sink or wall. Sometimes you’ll find small stamped codes there.
2. Check for a model or series number
Many Price Pfister faucets include a model number stamped or stickered somewhere on the body. Look:
- On the underside of the spout
- On the back of the faucet (toward the wall)
- Under the sink on the faucet body or water lines
- Inside the handle cap (if it pops off)
Older models may use four to eight-digit numbers, sometimes starting with a “0” or “F.” Write it down—this can help match it to a parts diagram or catalog later.
3. Identify by cartridge or valve type
If your faucet is leaking or won’t shut off, you might need to remove the handle and check the internal parts. Price Pfister has used a few different cartridges over the years:
- Legacy 974-491 and 974-292 cartridges: Found in many older single-handle kitchen and bath faucets
- 910-031 or 910-032 stems: Common in 2-handle bathroom and tub/shower faucets
- Seat-and-spring assemblies: Used in some compression-style models from the 70s and 80s
Take the old cartridge to a hardware store or match it online through Pfister’s support site. The design of the cartridge can often narrow down the model family.
4. Compare with online catalogs or Pfister’s part finder
Pfister has a fairly helpful support system. You can try:
- Pfister’s Support Page — enter your faucet’s description or browse photos
- Kitchen Faucet Catalog — for visual comparisons
- Contacting customer service with a photo — they usually respond quickly with part numbers or manuals
Even if you don’t know the exact model, sending a picture of the faucet + cartridge + mounting area usually helps them identify it within a day.
5. Use the faucet’s style as a clue
Still stuck? Look at the design. Older Pfister faucets often reflect the era they came from:
- 1970s–1980s: Brass finishes, crystal-style handles, and wide 8″ spreads
- 1990s–2000s: Curved necks, oil-rubbed bronze options, and pull-out sprayers became common
- Post-2010: Sleeker lines, matte black, touchless features, and the brand name shifted to “Pfister” only
You might not get an exact model match this way, but you’ll get close enough to narrow down the parts you need.
Bonus Tip: Bring it to a hardware store
Still not sure? Take the cartridge, handle, or even a picture of the faucet to a local hardware or plumbing store. Experienced staff can often identify the model based on part shape alone—especially if it’s a common one.
Final Thoughts
Identifying an old Price Pfister faucet isn’t always straightforward, but it’s not impossible. Check for logos, look underneath, pull the cartridge, and compare photos online. With a bit of digging—or a quick message to Pfister’s support—you’ll usually find the info you need to order the right part or replacement.
Need help identifying your faucet? Snap a photo and contact Pfister’s support team. They’re surprisingly responsive and often send out replacement parts free of charge if your model is still under their lifetime warranty.